Spalarea Apple Watch este noua recomandare a Apple pentru rezolvarea unor probleleme cu noua coroana digitala, anumiti utilizatori sesizand faptul ca aceasta inceteaza sa mai functioneze corect dupa cateva zile de utilizare. Se pare ca folosirea Apple Watch in mod constant la mana poate genera probleme cu mecanismul conceput de catre Apple, astfe ca solutia inginerilor companiei americane este spalarea ceasului.
Fie ca este vorba despre o coroana digitala lipicioasa, fie ca este vorba despre diverse tipuri de mizerie intrate in mecanism, se pare ca solutia cea mai buna pentru a readuce lucrurile la normal este spalarea ceasului in zona coroanei digitale. Pe forumurile de discutii ale Apple exista un numar mare de utilizatori care raporteaza probleme cu noua coroana digitala, in anumite cazuri ea blocandu-se complet.
I’m experiencing light stickiness every time I go to turn the crown, but it smoothens out shortly after. And this repeats itself after the crown isn’t touched for a few seconds. It wasn’t like this on day one. Mine doesn’t take considerable pressure to turn though, you just feel that it’s sticky at first as if there was a bit too much friction.
Vizitarea unui Apple Store cu aceasta problema i-a determinat pe angajati sa sustina ca Apple Watch-urile afectate nu au o functionalitate normala, magazinele preluand unitatile defecte pentru inlocuire completa. Partea interesanta este ca majoritatea unitatilor cu probleme sunt cele Sport, care ar trebui sa fie rezistente chiar si la exercitii fizice facute in praf, noroi, etc, sau la cristalizarea transpiratiei in locasele coroanei digitale, dar modelele din otel inoxidabil nu sunt ferite de defect.
Well started experiencing same issue with my sport. Bad enough that double clicking was almost impossible. Took in today to Genius and three diff people came over and tested. All said was not normal. But I decided to send back now. Will be interesting test to see how much I miss it. Bigger concern is why and perhaps the sport vs ss and possibility of it keeps happening. Ps. We compared to four diff demo units and all had same tactile feel except mine.
Desi angajatii Apple au fost nedumeriti in legatura cu existenta problemei, compania americana admite faptul ca exista posibilitatea ca ale sale ceasuri sa fie afectate de asemenea defecte, iar in aceste cazuri recomanda spalarea lor. Utilizatorilor li se spune ca plasarea unui Apple Watch sub jetul de apa calda al unui robinet timp de 10 – 15 secunde ar trebui sa inlature orice blocheaza coroana digitala din a functiona corect.
If the Digital Crown gets stuck or won’t move, it might be because of dirt or debris. If you find substances like dust or lotion around the Digital Crown, follow these steps to clean, and repeat as needed:
- Turn off your Apple Watch and remove it from the charger.
- If you have a leather band, remove it from your Apple Watch.
- Hold the Digital Crown under lightly running, warm, fresh water from a faucet for 10 to 15 seconds. Soaps and other cleaning products shouldn’t be used.
- Continuously turn and press the Digital Crown as water runs over the small gap between the crown and the housing.
- Dry your Apple Watch with a non-abrasive, lint-free cleaning cloth.
Partea proasta a acestei recomandari este ca ea nu rezolva complet problema pentru utilizatori, in cazul unora rezolvarea nefiind nici macar temporara, astfel ca acum incep sa apara si persoanele nemultumite de achizitie. Din pacate asemenea probleme pot fi inalnite la orice fel de ceasuri si pentru viitor Apple va trebui sa gaseasca metode care sa impiedice afectarea coroanei digitale intr-un asemenea mod, dar ramane de vazut daca va reusi.
This post was last modified on mai 1, 2015, 9:39 AM 09:39